6mm wargames minis – Page 6 – My Toy Soldiers & Me

ACW (IV) Special Stands

Pontoon Bridge (Baccus) and Cavalry wading special stand. painted by Mersey Wargames.

As a corollary, when at the end of building Brigade stands I stopped to think a bit, I decided to put variety and glue the minis differently on them stands, after all the 60×30 stand was already paramount in my Armies and had a lot of two lines of 12 + 4 skirmishers in front so… those questions come to my mind:

1) How do you represent the feat of the First Minnesota at Gettysburg?, it was a single Regiment NOT a Brigade who charged by orders ALONE! into a Confederate Brigade who was superior in numbers and also outflanked them on both sides… HOW DO YOU DO IT?… Don Troiani’s paintings as an inspiration… but not exclusively that. I am not shouting excuse the emphasis.

2) At the end of the ACW there were Rebel Brigades reduced so much that in fact had the strength of a Regiment…

Well, all of that put me in gear to do some special stands, the theory was completed: I did build new stands in the following manner:

Using the standard 60x30mm Baccus stand I represented units understrength, meaning NOT the usual two ranks of 12 minis and 4 skirmishers in front.
I represented isolated units with flanks unprotected -aka 1st Minnesota at Gettysburg- Using fewer minis in the center of the stand with no skirmishers and still two ranks.
In the same stand I will put side by side two units with their colours but much reduced -Confederates- to represent late war status.
Last but not least that induced other supporting ideas… why not push forward both lines and eliminate skirmishers from the picture making some minis in the rear rank a bit not aligned -that represents stragglers or tired soldiers trying to catch up- a new stand to give variety to the tabletop- and what about mounted officers of the Brigade?… THE MEN MUST SEE US TODAY!… just another variation… and so on… (still not shouting).
And in my final order I included Brigades with flank refused, as in Little Round Top extreme of the line.

I did the drawings and schemes and post them to Greg at MERSEY WARGAMES PAINTING SERVICE, those “new stands” will gave my own rules more scope for variety.

I am probably not the first to realize the flexibility of the system that enables a more liberal composition of the minis glued to the base -I am not claiming originality at all- but I guessed it would be a good idea to post my thoughts about them.

Hereby find the instructions and diagrams -scanners attached- for the painting of the ACW Infantry and Cavalry.

1.- Union troops are absolutely REGULAR in dress, blankets Black tarpaulin (Impermeable gear). Only one Regiment of coloured troops (NEGROES) with white officers. Hats always black.

2.- Confederates mainly butternut and dark brown blankets. I appreciate if bits of grey showing be that kepis, jackets or pants in 50% of the minis.

NOTE: These typed instructions have pre-eminence over the diagrams, in case of conflict between the two follow the present text. Of course, clarifications can be provided.

As you know these stands have NO skirmishers, have the standard double line (pushed forward because NO skirmishers) always central command strip with flags in the centre in the first rank -officer to one side, drummer at the other- with independence of the gluing of the minis on the stand which is the purpose of this present order: ADD VARIETY TO THE ASPECT OF THE STANDS. All minis are facing forwards, even when refused flanks or catching up… no minis running away. Remember NO NEED TO GLUE FLAGS ON THEM, just paint the guidons on the cavalry.

Diagrams to make myself understood by a painter of minis more than a thousand miles away! -Greg is REALLY helpful-

Diagrams above underway… painting by Mersey Wargames.

The above stands finished with flags etc. Mersey Wargames Painting service and final touch by yours truly.

A.- Union Infantry stands:

A1.- Number one on the diagrams, 20 minis glued as shown with margin at the sides, meaning as together (centred) as on a typical stand of 28 minis such POLEMOS.

There are two minis “catching up” at the rear, not much distanced, one and two base width is OK (on the diagram looks much distorted). All kepi with blanket.

A2.- Same as above but a mix of kepi and hats. 4 minis in the rear rank “catching up”. Always same criteria as on A1.

A3.- 24 minis + Mounted Officer at the front (from the Cavalry packs), It is a standard POLEMOS stand with the addition of the Mounted officer instead of skirmishers and 3 minis catching up in the rear rank. Minis glued more forward to permit that.

A4.- 12 minis. All black hats. Centred in stand. Flanks unprotected.

A5.- 20 minis. Right flank refused. Same as above.

A6.- Stand with two small Brigades. 24 minis + Mounted Officer. First rank of the rear Bgde. and Second rank of forward Bgde. can be aligned.

A7.- Same as A5. But the other flank refused. (Left). 20 minis.

A8.- Put as many kepis as possible in that one… at least 50%. Very similar to A1 but those are Coloured troops with white officers. Two minis “catching up”.

Had to find stands to fit the width of the BACCUS Bridge. I did also other Special stands of course see ACW II.

B.- Confederate Infantry stands:

B1.- Number one on the diagrams, 20 minis glued as shown, meaning as together (centred) as on a typical stand of 28 minis such POLEMOS. But right flank refused as in A5. Mixed lot. Use different colours for hats.

B2.- Same as above but left flank refused.

B3.- 12 minis + Mounted officer.. All “straw coloured” hats. Centred in stand. Flanks unprotected.

B4.- Stand with two small Brigades. 24 minis + Mounted Officer. First rank of the rear Bgde. and Second rank of forward Bgde. can be aligned. Quite as A6.

B5.- Same as B4 minus mounted officer. When aligned like this they have to match B4 and B6 position glued as to look a “LINE”. In fact it would look as an standard POLEMOS stand with two sets of colours, no skirmishers and pushed forward.

B6.- Same as B4 but symmetrical, see diagram.

TOTAL of 124 infantry minis and 3 mounted officers. (Include 9 command strips).

For the Infantry stands you will need 14 units of 60x30mm bases NOT INCLUDED.

ACW Cavalry Stands:

Colour of horses predominantly Dark and Red Bays, some Black. All buglers on white horses. Mix a bit.

C1.- 60x30mm stand with 9 minis (UNION) wading a river as mentioned in previous emails:

The idea is to have in a 60×30 Baccus standard base of 9 figures unit in column wading a river… IN LONGITUDINAL WAY DIRECTION FRONT OF 30mm … that means: To cut the bases of the first three (command) and the last two troopers, and the whole legs of the horses (4) in the middle of the base, glue them like that in a more or less “disordered way” but still in column… and paint the base sky blue… as WATER.

C2.- Same as above but Confederate. (No butternut)

C3.- A typical Cavalry Brigade of 9 minis (UNION) as per POLEMOS… but in arrow formation as seen in the Forum in Baccus webpage. Officer forward and troopers on each side a bit behind each time, so that the extremes are the more back figures. Quite straightforward.

C4.- Same as above. Confederate. (No butternut)

Now, what to do with the remaining mounted minis?. NO officer’s left but still guidons (standard-bearers) and buglers.

Please use 30×30 stands on the rest, groups of 4 minis, 2 in front 2 behind as you have done for me repeatedly.

C5.- 4 Union stands, guidon on front rank (right side), bugler front rank (left side). Two troopers behind. Please mix hats and kepis.

C6.- 2 Confederate Stands same as above. (No butternut)

C7.- 4 Union stands with 4 troopers mixed headgear.

C8.- 2 Confederate Stands with 4 troopers as C7. (No Butternut).

Some Special Stands with customized flags (Custer at the LBH is not ACW of course) but the purpose of the pic is to show how easy is even in 6mm.

ACW (V) 2020 way of doing my last stands for the ACW

Confederacy Division advancing. Note the General of Division with Colours)

Finally found a way to post my last ACW parcel to Greg (Mersey Painting services)… hopefully its gone today… and I have seen in FaceBook that Peter is probably opening the cart for orders next friday, that way Greg can get bases and the last pack needed!… ACW01 if you want to know. So with a little luck and in due time I will complete that period to satisfaction… meaning 50 infantry Union Brigades etc. Will post pics when I get them by summer’s end… In the post “New” in this hereby blog I explained how to add variety to the LOOK of the minis in them stands… I will not repeat myself. As usual I will add some finishing touches and the flags.

I am not going to tire you endlessly with the permutations I do in my head with Baccus minis projects. I buy one thing having in mind doing for example ACW Division Generals (I know Polemos and Altar of Freedom do not use them but… I do what I want as everybody else!)… and then I get nagging doubts and decide to use the minis as brigade commanders of Infantry Units… Mounted standard-bearers have been considered for Rush’s lancers… even tempted by 60×60 stands to speed movement… I think that the Polemos approach is very well suited to the ACW even if I write and play by my own rules… the Tempo bidding is probably OK for those who like it… but for solo playing I prefer the “turn of a friendly card”… after all IMHO when two armies met on the field specially in 1862-1863 they meant business… aka friction/attrition until they called the thing of… war is mainly throwing things at the enemy and be brave enough to stand in the receiving end of what he throws at you (from the beginning of times I guess). So my ACW Armies do not need to be “motivated” they know what are expected from them… but of course they are subject to fog of war and the unexpected… the “chance of war”.

What follows I do not delete just to show you the mental processes I am going through. Take care.

Monday the shop at Baccus opened again. I could not resist buying some ACW stuff to polish my Armies even more… What “polish” means?… I am never 100% satisfied with my collections… so I want to try a new approach on some units. That means the cumbersome task (FUN!) that the minis will fly to me in Andorra… I will convert, organize and even paint some details I can not do once finished and based by the painters… and then send to MERSEY WARGAMES PAINTING SERVICE to be properly finished. After a deep thought about it I am going to rearrange the units of the Union Army and a bit of shaking the Rebs too… just for the ultimate search of perfection, if that exists mind…

I have bought three packs of ACW07 and one each of Generals (USA and CSA). Five packs in all. I asked for strips with mounted standard-bearers first and foremost on those two last packs! Still not sure how I am going to base them so I did not bought the bases… that Greg can do once I have organized the troops (well, Brigades).

updated 14-March-2020: Well, got the minis at last!… in fact I have had them for a couple of weeks by now… useful information: If you buy three packs of ACW07 you will be able to cut from the strips the minis with kepi and blanket across chest in a way as to get two complete brigades of them!… of course that will leave you with 8 extra brigades of infantry with hat!… but THAT is what I wanted… The 2 kepi+blanket with 4 hat+blanket will make the six brigades (Union) needed to substitue the one’s I got with Rapier’s minis… they are not bad mind… but I prefer Baccus… I still do not know what to do with the old six… but something would be devised… still six brigades left that I would probably ask the painters to glue in column instead of in line… Another thing I did was buying packs of generals… some would go to the Pony Wars proxies… and I am still doubting if Division Generals would be a good move or addition… even if Polemos rules says no need for them… Also under the influence of magazine Battlegames number 15 full of cavalry eye candy pics I am considering a bit more of Cavalry for my Armies… East Cavalry Field at Gettysburg and Brandy Station (in inverse order of course)… so… waiting for the Postman again… and the reopening of another window in that flickering shopcart at Baccus!

Of course the current pandemic has also disturbed my projects, including the pics making and the ability of sending minis to the painters… hope all ends well yourselves included. Take care.

That’s it DHL collected the parcel with my last ACW Brigades… hopefully not long now… will take pics and show you what is the end of my ACW collection in 6mm.

Updated 26th October. Parcel from Mersey Wargames Painting Service arrived with my last Brigades (ACW), have to put the flags etc. EXCELLENT! Have a couple of pics.

A close up.

1st November 2020. Have added the flags (some from Baccus some from Stone Mountain) and now I am going to check the paint and add little details. Will add some real close ups when finished.

Here are some pics after last “touchs”.

Ok. Having really finished the ACW project. I am writing my own personal SOLO ACW 6mm rules, have no intention to publish them, but I am going to do the effort of putting them down as if that was the purpose. Of course the alternative of playing with others will be in mind… But first things first. I have discovered that it is over easy to complicate them enough for SOLO playing. The idea is that the mechanisms of resolving combat are well explained with diagrams and pics. After that it is more easy to introduce “fog of war” for various players and other imponderables. I have used Fire&Fury, POLEMOS and Altar of Freedom as guides but “biding” against oneself playing solo does not work of course, and also the idea of a “clock” is very alien to my playing. Of course there would be “chance cards” and other issues introduced to make for different alternative scenarios to develop. I have always ranted against commercial sets of rules and now it is my time to be criticized… LOL.

The Seminary at Gettysburg (LEVEN painted by REVEILLE). 6mm

Dunker Church – Antietam (same as above)

And finally the caissons from Reveille /Thank you Dan).

ZINDERNEUF

Not all of the restrictions of the pandemic are a boring thing, in fact it has given me time to do things I have done on my mind for several years and never materialized because of lack of time and sheer laziness. The normal live I live keep postponing those things ad infinitum.

To begin at the beginning, I have always had a set of building bricks called EXIN CASTILLOS, it was a wonderful Spanish toy of the sixties, I played with them and build castles, so did my children when young because I purchased sets for them (nowadays have done so with my grandchildren too), one day of “cleaning up” at home I rescued the discarded sets of mine&my children from the list of things to throw away, put them in a box and stored them in my (then) office waiting for better days.

Fort Zinderneuf, a lonely outpost in the Saharian South manned by the FFL, if you have read P.C.Wren or seen the films not much explanations required. 54mm Dorset Figures.

In the meantime my collection of Dorset Soldiers (thanks again to Giles Brown) was slowly growing up and the French Foreign Legion in action poses (mainly) occupied three shelves of one of the cabinets in Pal. So, one day I took the box from my office, cleaned the plastic pieces with soap&water and produced a mini ZINDERNEUF in 54mm to play with my Dorset Soldiers set. On another trip I had brought to Pal my camera/tripod etc.

Here you have the full set of pieces, I did not use the circular one’s neither the too Dark Ages bits for ZINDERNEUF, but I always sort them out before “building”

This is the result: a solo game I play against “time”, will the arabs kill all the defenders of the fort before help from Tokotu arrives? Will “Beau” and “John” survive as long as in the novel?.

Quickly built… nearly exhausting the supply of rectangular pieces.

By the way, if you considere the BEAU GESTE trilogy (in fact five books and some extra short stories!) too old fashioned for you, you simply pass…

Now, that was fun!, it has been years since I did a model with those blocks!, it’s like riding a bycicle… you never forget those tricks with the bricks.

I have done it in 6mm (still in my Baccus collection), 28mm (To The Redoubt… sold), 54mm (Dorset Soldiers) and in 75mm with Playmobils (now in the collections of my grandchildren).