Visits: 807
As a corollary, when at the end of building Brigade stands I stopped to think a bit, I decided to put variety and glue the minis differently on them stands, after all the 60×30 stand was already paramount in my Armies and had a lot of two lines of 12 + 4 skirmishers in front so… those questions come to my mind:
1) How do you represent the feat of the First Minnesota at Gettysburg?, it was a single Regiment NOT a Brigade who charged by orders ALONE! into a Confederate Brigade who was superior in numbers and also outflanked them on both sides… HOW DO YOU DO IT?… Don Troiani’s paintings as an inspiration… but not exclusively that. I am not shouting excuse the emphasis.
2) At the end of the ACW there were Rebel Brigades reduced so much that in fact had the strength of a Regiment…
Well, all of that put me in gear to do some special stands, the theory was completed: I did build new stands in the following manner:
- Using the standard 60x30mm Baccus stand I represented units understrength, meaning NOT the usual two ranks of 12 minis and 4 skirmishers in front.
- I represented isolated units with flanks unprotected -aka 1st Minnesota at Gettysburg- Using fewer minis in the center of the stand with no skirmishers and still two ranks.
- In the same stand I will put side by side two units with their colours but much reduced -Confederates- to represent late war status.
- Last but not least that induced other supporting ideas… why not push forward both lines and eliminate skirmishers from the picture making some minis in the rear rank a bit not aligned -that represents stragglers or tired soldiers trying to catch up- a new stand to give variety to the tabletop- and what about mounted officers of the Brigade?… THE MEN MUST SEE US TODAY!… just another variation… and so on… (still not shouting).
- And in my final order I included Brigades with flank refused, as in Little Round Top extreme of the line.
I did the drawings and schemes and post them to Greg at MERSEY WARGAMES PAINTING SERVICE, those “new stands” will gave my own rules more scope for variety.
I am probably not the first to realize the flexibility of the system that enables a more liberal composition of the minis glued to the base -I am not claiming originality at all- but I guessed it would be a good idea to post my thoughts about them.
Hereby find the instructions and diagrams -scanners attached- for the painting of the ACW Infantry and Cavalry.
1.- Union troops are absolutely REGULAR in dress, blankets Black tarpaulin (Impermeable gear). Only one Regiment of coloured troops (NEGROES) with white officers. Hats always black.
2.- Confederates mainly butternut and dark brown blankets. I appreciate if bits of grey showing be that kepis, jackets or pants in 50% of the minis.
NOTE: These typed instructions have pre-eminence over the diagrams, in case of conflict between the two follow the present text. Of course, clarifications can be provided.
As you know these stands have NO skirmishers, have the standard double line (pushed forward because NO skirmishers) always central command strip with flags in the centre in the first rank -officer to one side, drummer at the other- with independence of the gluing of the minis on the stand which is the purpose of this present order: ADD VARIETY TO THE ASPECT OF THE STANDS. All minis are facing forwards, even when refused flanks or catching up… no minis running away. Remember NO NEED TO GLUE FLAGS ON THEM, just paint the guidons on the cavalry.
A.- Union Infantry stands:
A1.- Number one on the diagrams, 20 minis glued as shown with margin at the sides, meaning as together (centred) as on a typical stand of 28 minis such POLEMOS.
There are two minis “catching up” at the rear, not much distanced, one and two base width is OK (on the diagram looks much distorted). All kepi with blanket.
A2.- Same as above but a mix of kepi and hats. 4 minis in the rear rank “catching up”. Always same criteria as on A1.
A3.- 24 minis + Mounted Officer at the front (from the Cavalry packs), It is a standard POLEMOS stand with the addition of the Mounted officer instead of skirmishers and 3 minis catching up in the rear rank. Minis glued more forward to permit that.
A4.- 12 minis. All black hats. Centred in stand. Flanks unprotected.
A5.- 20 minis. Right flank refused. Same as above.
A6.- Stand with two small Brigades. 24 minis + Mounted Officer. First rank of the rear Bgde. and Second rank of forward Bgde. can be aligned.
A7.- Same as A5. But the other flank refused. (Left). 20 minis.
A8.- Put as many kepis as possible in that one… at least 50%. Very similar to A1 but those are Coloured troops with white officers. Two minis “catching up”.
B.- Confederate Infantry stands:
B1.- Number one on the diagrams, 20 minis glued as shown, meaning as together (centred) as on a typical stand of 28 minis such POLEMOS. But right flank refused as in A5. Mixed lot. Use different colours for hats.
B2.- Same as above but left flank refused.
B3.- 12 minis + Mounted officer.. All “straw coloured” hats. Centred in stand. Flanks unprotected.
B4.- Stand with two small Brigades. 24 minis + Mounted Officer. First rank of the rear Bgde. and Second rank of forward Bgde. can be aligned. Quite as A6.
B5.- Same as B4 minus mounted officer. When aligned like this they have to match B4 and B6 position glued as to look a “LINE”. In fact it would look as an standard POLEMOS stand with two sets of colours, no skirmishers and pushed forward.
B6.- Same as B4 but symmetrical, see diagram.
TOTAL of 124 infantry minis and 3 mounted officers. (Include 9 command strips).
For the Infantry stands you will need 14 units of 60x30mm bases NOT INCLUDED.
ACW Cavalry Stands:
Colour of horses predominantly Dark and Red Bays, some Black. All buglers on white horses. Mix a bit.
C1.- 60x30mm stand with 9 minis (UNION) wading a river as mentioned in previous emails:
The idea is to have in a 60×30 Baccus standard base of 9 figures unit in column wading a river… IN LONGITUDINAL WAY DIRECTION FRONT OF 30mm … that means: To cut the bases of the first three (command) and the last two troopers, and the whole legs of the horses (4) in the middle of the base, glue them like that in a more or less “disordered way” but still in column… and paint the base sky blue… as WATER.
C2.- Same as above but Confederate. (No butternut)
C3.- A typical Cavalry Brigade of 9 minis (UNION) as per POLEMOS… but in arrow formation as seen in the Forum in Baccus webpage. Officer forward and troopers on each side a bit behind each time, so that the extremes are the more back figures. Quite straightforward.
C4.- Same as above. Confederate. (No butternut)
Now, what to do with the remaining mounted minis?. NO officer’s left but still guidons (standard-bearers) and buglers.
Please use 30×30 stands on the rest, groups of 4 minis, 2 in front 2 behind as you have done for me repeatedly.
C5.- 4 Union stands, guidon on front rank (right side), bugler front rank (left side). Two troopers behind. Please mix hats and kepis.
C6.- 2 Confederate Stands same as above. (No butternut)
C7.- 4 Union stands with 4 troopers mixed headgear.
C8.- 2 Confederate Stands with 4 troopers as C7. (No Butternut).
